Connect with us

Maritime

NYK to build its fourth LPG dual-fuel very large LPG / NH3 carrier

Published

on

NYK to build its fourth LPG dual-fuel very large LPG / NH3 carrier. Image: NYK Line
NYK to build its fourth LPG dual-fuel very large LPG / NH3 carrier. Image: NYK Line
Listen to the story (FreightComms AudioPost)

 

NYK announced the order of its fourth liquefied petroleum gas dual-fuel very large LPG / liquefied ammonia gas carrier from Kawasaki Heavy Industries Ltd. The ship will be built at the KHI Sakaide Works shipyard and is set for delivery in 2025.

Like the LPG dual-fuel very large LPG / NH3 carriers already ordered by NYK, the vessel will be equipped with separate cargo tanks designed to carry LPG and ammonia at the same time to flexibly respond to various trade patterns.

Ammonia is attracting attention not only as a raw material for chemicals and fertilizers but also as a future zero-emission fuel that does not emit carbon dioxide when combusted.

Furthermore, in addition to the LPG dual-fuel engine, the ship will have a shaft generator that can generate electricity during the voyage by using the rotation of the shaft that connects the main engine to the propeller. Since the diesel generator can be stopped during normal seagoing transit, realizing full navigation with LPG fuel will be possible except for the use of a small amount of pilot fuel.

When LPG is used as fuel, exhaust gas from the ordered VLGC will contain at least 95% less sulfur oxide and 20% less CO2 compared to NYK’s conventional VLGCs using heavy-oil fired engines.

This new VLGC will comply not only with the SOx Global Cap regulations that were tightened from January 2020 but also with the IMO’s Energy Efficiency Design Index Phase 3 regulations, which implemented stricter COemission standards from April 2022.

Moreover, the vessel is expected to be given notations by Nippon Kaiji Kyokai as a VLGC that has a preparatory design in accordance with the guidelines issued by ClassNK so that this vessel may use ammonia fuel in the future.

<Vessel Particulars>
Length overall: approx. 230 meters
Breadth (moulded): 37.20 meters
Depth (moulded): 21.90 meters
Summer draft (moulded): 11.65 meters
Tank capacity: approx. 86,700 cubic meters

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Maritime

NYK signs a charter contract with Osaka Gas International Transport

Published

on

NYK signs a charter contract with Osaka Gas International Transport. Image: NYK Line
NYK signs a charter contract with Osaka Gas International Transport. Image: NYK Line
Listen to the story (FreightComms AudioPost)

 

In September, NYK signed a multi-year time charter contract with Osaka Gas International Transport Inc., a Daigas Group company, for a new LNG carrier.

This vessel, named “Grace Freesia,” comes equipped with a WinGD-made dual-fuel slow-speed diesel engine, i.e., X-DF diesel engine that has superior fuel-consumption efficiency and can operate on marine gas oil or boil off gas stored in the cargo tank.

The carrier also features a re-liquefaction system that can use surplus boil-off gas efficiently. The cargo tank is a 174,000 cubic meter capacity membrane-type tank that makes use of advanced insulating materials to suppress the boil-off rate in the cargo tank and realizes significantly more efficient, economical, and environmentally friendly operation.

By utilizing its experience and network cultivated as a world-scale LNG-carrier owning-and-managing company, NYK is contributing to Japan’s stable energy supply.

<Vessel Particulars>

Length overall: 297.160 meters
Breadth: 46.40 meters
Cargo tank capacity: 173,956 m3
Main engine: X-DF engine
Shipbuilder: Hyundai Samho Heavy Industries Co., Ltd.
Flag: Bahamas
Delivery: 2022

In February 2021, NYK released the “NYK Group ESG Story,” which aims to further integrate ESG into the company’s management strategy and promotes activities that contribute to the achievement of the SDGs through business activities. In March this year, NYK released the updated “NYK Group ESG Story 2022,” which introduces initiatives for integrating ESG into the Group’s management strategies set forth in the “NYK Group ESG Story” and provides a partial explanation of the Group’s sustainable growth strategy from a long-term perspective.

To strongly promote ESG management, the NYK Group will encourage new value creation as a sustainable solution provider through a business strategy that includes the transportation of LNG, which is expected to be a low-carbon bridging fuel prior to the transition to future zero-emission fuels.

Continue Reading

Dredging

Damen delivers complete equipment package for KOEM multipurpose vessel

Published

on

Damen delivers complete equipment package for KOEM multipurpose vessel. Image: Damen Shipyards
Damen delivers complete equipment package for KOEM multipurpose vessel. Image: Damen Shipyards
Listen to the story (FreightComms AudioPost)

 

Damen Shipyards delivered a complete equipment package for the multipurpose vessel ENDAM. Owned by the Korean Marine Environment Management Corporation, the newbuild combines emergency oil spill recovery activities with maintenance dredging tasks.

With a 4,100 m3 hopper hold, the vessel was built by HJ Shipbuilding & Construction at its Busan yard and designed by KmsEmec. The mission equipment package provided by the Damen Technical Cooperation team included a 15 m rigid oil sweep arm with a dedicated pump and handling crane for the emergency oil spill recovery functionality, and a complete turnkey dredging system, which was designed specifically for the vessel.

Turnkey dredge package

The turnkey dredge package consisted of both loading and discharging equipment, a hydraulic system, dredging control system and various drives. A 900 mm trailing suction pipe, designed to dredge at a maximum depth of -30m, is hoisted by three dedicated gantries and their hydraulically operated winches. All the trailing suction pipe components are located starboard aft.

A Damen dredge pump, type BP9075HD, completed the dredge pipe arrangements. The highly efficient slurry pump is designed for both suction dredging, as well as discharging over the bow using the bow coupling unit or rainbow nozzle. This hopper discharging equipment, including 12 bottom dump valves which Damen designed, were all part of the dredge package. Furthermore, dredge valves in various pressure stages were delivered for the suction and discharge piping. Dedicated dredging instrumentation completed the package. This is crucial to monitor and visualise the dredging process and to optimise the dredging operations.

Component integration

Due to the DTC team’s extensive experience in component integration at non-Damen yards, the large system parts were delivered from the Netherlands and integrated effortlessly. As well as the mission equipment, the delivery scope included a hydraulic system. This is a logical choice as the dredging equipment is its main user. Additionally, a 3,500-kW electric dredge pump drive and a 1,000-kW electric jet water pump drive were shipped to Korea. The delivery was completed with a full set of spares and Damen also carried out the commissioning and training on board.

The vessel was named ENDAM, which means ‘the fence that protects you’ in the Korean Jeju dialect. A festive handover ceremony took place in the summer and ENDAM has successfully started operating along the Korean coast.

Continue Reading

Maritime

Kongsberg Digital delivers dynamic positioning simulators to MOL

Published

on

Kongsberg Digital delivers dynamic positioning simulators to MOL. Image: Kongsberg Digital
Kongsberg Digital delivers dynamic positioning simulators to MOL. Image: Kongsberg Digital
Listen to the story (FreightComms AudioPost)

 

MOL DPTC is the first DP training centre in Japan to be accredited by the Nautical Institute to provide NI-approved dynamic positioning training courses.

The delivery includes a K-Sim DP Anchor Handling simulator to support advanced offshore training, as well as four KONGSBERG K-Pos DP Basic desktop simulators for basic DP training, including instructor stations to manage the exercises.

As part of the contract, KDI will also deliver a newly developed hydrodynamic ship model; a digital version of the DP2 cable laying vessel KDDI Cable Infinity, owned by Kokusai Cable Ship Co., Ltd.

The simulator will be used to provide NI-approved DP training courses for MOL crew and the company’s customers. It will also be used to develop and provide customized training for cable-laying operations, offshore wind power related projects, or other offshore projects that utilize dynamic positioning systems. Furthermore, the simulator will also be made available for research and consulting services to serve the wider maritime industry.

The NI training scheme for obtaining a Dynamic Positioning Operator certificate has formerly been a time-consuming process, involving onshore courses and ‘real life’ DP watch keeping experience on DP vessels.

The K-Sim DP Class A simulator is approved to be used for DP Seatime Reduction training under the Nautical Institute’s training scheme. K-Sim integrates with an advanced physics engine which, in addition to hydrodynamic modelling allows vessels, objects and equipment to behave and interact realistically. This is extremely important for making competence training adaptable to real-life operations.

Aditionally, KDI has signed a five-year Long-Term System Support Program contract with MOL Marine and Engineering Co. Ltd. to keep the simulator maintained in top condition. This ensures hassle free operations and support, and any new system updates will be actively managed by KDI.

“This contract signifies recognition of Kongsberg Digital’s Maritime Simulation and DP technologies by one of the largest shipping companies in the world,” says Andreas Jagtøyen, Executive Vice President Digital Ocean, Kongsberg Digital. “The K-Sim DP Class A simulator has the necessary fidelity and realism required for engineering, training and mission planning, as well as assessment of existing and new crews, where various challenging operations can be studied, evaluated and optimized safely in the simulator.”

“We Installed Kongsberg DP simulator and were able to open a quality DP training center in Tokyo, Japan” says Mr. Nakashima Takashi, President, MOL Marine and Engineering Co., Ltd. “We believe that MOL Group can contribute more and more to the offshore wind power business, which is in high demand in Japan.”

Continue Reading

Popular

Copyright © 2017-18 | FreightComms | Made with ♥ in Singapore