Connect with us

Maritime

Rolls-Royce to renew ferry automation system solutions

Published

on

Rolls-Royce to renew ferry automation system solutions Image: Rolls Royce
Rolls-Royce to renew ferry automation system solutions Image: Rolls Royce
Listen to the story (FreightComms AudioPost)

Rolls-Royce’s new mtu engines, new mtu ship automation system, and new mtu Go! tool for remote service have well and truly future-proofed the high-speed catamaran Avemar Dos run by Spanish operator Balearia. Four new-generation mtu 20V1163 M84 units replaced the previous 1163 units, taking the vessel to a new level of ecological soundess. Fuel consumption – and with it CO2 emissions – are 8% lower than with the previous propulsion system. Furthermore, the new Series 1163 units deliver the same power output, but with a 33% reduction in nitrogen oxide emissions, thereby meeting the requirements of the IMO Tier II emissions standard.

The ferry’s automation system has also been renewed: the mtu ship automation not only controls and monitors engines and gearboxes, but numerous other crucial ship systems such as fuel tanks and on-board generator sets. That means that the crew can benefit from an all-round view of the ferry. The new ship automation system brings not only new software, but new screens and computers with interfaces to other systems on board. The digital platform mtu Go! puts the finishing touch to the ferry’s all-round update, allowing the customer to remotely access the vessel’s operating data at any time, monitor its condition and predictively plan maintenance.

Pablo Vivancos, Sales General Manager at Rolls-Royce Solutions Iberica, said, “The Avemar Dos is now the fourth Balearia ferry to be powered by mtu. Several of these ferries are supported by mtu Value Care maintenance agreements, individually tailored to suit each vessel. We’re very proud to be Balearia’s trusted partner.”

The Avemar Dos catamaran was built in 1996 by the Austal shipyard in Australia. It went into service in 1997 and following several changes of owner was taken over by ferry operator Balearia in 2008. It originally served the Strait of Gibraltar route between Algeciras and Ceuta. Now the new repowered ferry plies beween the mainland port of Denia and the Balearic islands of Ibiza and Majorca. The 82-m ferry can accommodate 855 passengers and 174 vehicles.

Besides the Avemar Dos, the Ramon Lull high-speed ferry was recently re-powered using mtu engines – in this case Series 4000 units. Other high-speed ferries, like Nixe and HSC Formentera Direct, have used mtu propulsion ever since going into service.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Maritime

The Port of Valencia begins electrification of its docks

Published

on

The Port of Valencia begins electrification of its docks. Image: Port Authority of Valencia
The Port of Valencia begins electrification of its docks. Image: Port Authority of Valencia
Listen to the story (FreightComms AudioPost)

 

A new step in the decarbonisation of the Port of Valencia and its firm commitment to be an emission neutral site by 2030. The Port Authority of Valencia (APV) has put out to tender the drafting and execution of the works for the electrical connection to ships for the Transversal Costa-MSC quay. This is the first electrification or Onshore Power Supply (OPS) project to be carried out by Valenciaport in the Valencian precinct.

The APV is thus initiating the procedure for the award of the contract for the drafting and execution of the project for the installation of electrical connections for ships and the maintenance of the same at the Transversal de Costa quay. To this end, Valenciaport has jointly launched the drafting of the construction project, the execution of its works and the maintenance of the installations in the same procedure for an amount of 12,468,626.8 euros (VAT included).

Onshore Power Supply (OPS) electrification infrastructures have been consolidated as a very useful tool for the decarbonisation of ports, as this system avoids the use of auxiliary engines of ships when they are docked in the enclosures. This reduces greenhouse gas emissions – due to the use of electricity that eliminates the consumption of fossil fuels used in these auxiliary engines – and stops the emission of particles and polluting gases.

This OPS initiative in the Port of Valencia will be carried out in parallel with the works on the new electrical substation – a second substation is also planned – which was put out to tender last month with a base budget of around 11 million euros and a completion period of 24 months. This infrastructure will be responsible for supplying green energy to the first OPS electrification project of the Transversal de Costa-MSC quay.

In this regard, Joan Calabuig, president of Valenciaport, stressed that “these are just two examples of real projects in the execution phase that confirm the firm commitment that Valenciaport is making to achieve the goal of being a zero-emissions port by 2030, twenty years ahead of the European Green Pact. It is a commitment to sustainability and to the society of our environment that is supported by initiatives such as the electrification of the docks, the use of hydrogen in port operations, the installation of photovoltaic plants or the commitment to intermodality with the railway. We are committed to sustainable growth that reinforces our position as a port of reference in the Mediterranean”.

Project included in the Next Generation Funds

The joint contracting of the preparation of the project and the execution of the corresponding works in the same procedure is carried out in response to the fact that there are no references in Europe compatible with the ISO/IEC/IEEE 80005 standard and in Spain there is currently no previous experience of OPS projects in operation with the characteristics of the pilot project defined by the Port Authority of Valencia. The combination of the individual components required for this type of installation (transformers, protection cells, disconnectors, frequency converters, etc.) with infrastructures for supplying electricity to ships requires specific projects, with technically complex solutions that have to be designed specifically for each location. In addition, and given that the execution of the construction project is subsidised by the European Union’s Next Generation funds and the Spanish Government’s Recovery, Transformation and Resilience Plan, the joint tender is the only way to meet the established deadlines, since if two separate contracts were launched, the one for the execution of the construction project could not be launched until the one for the drafting of the construction project had been awarded, which would mean that the work would be completed beyond the deadline for the execution of the works to meet the target set by Europe.

Continue Reading

Environment

MOL joins GCMD as impact partner to accelerate decarbonisation

Published

on

By

MOL joins GCMD as impact partner to accelerate decarbonisation. Image: Pixabay
MOL joins GCMD as impact partner to accelerate decarbonisation. Image: Pixabay
Listen to the story (FreightComms AudioPost)

 

The Global Centre for Maritime Decarbonisation GCMD and MOL announced the signing of a five-year Impact Partnership agreement. On the same day, both parties held a signing ceremony at the GCMD office in Singapore.

Decarbonisation in the maritime industry is a challenge that needs to be achieved through accelerating collaboration and increasing investment by shipping companies, their customers, ports, energy suppliers and public sector actors. As an Impact Partner of GCMD, MOL will utilise its expertise developed over their long history and make various contributions and collaborations through its participation in GCMD’s projects, including providing access to vessels, operating data and evaluation reports so that internal learnings can be shared publicly and used for future trials.

MOL is one of the world’s leaders in the maritime industry and has been leading worldwide discussions on achieving decarbonisation. The carbon budget concept imposes a ceiling to the cumulative amount of greenhouse gas (GHG) that can be emitted globally in order to limit global temperature rise to 1.5 degree Celsius by 2050. Intermediate targets to reduce emissions, in addition to a net-zero target, are necessary. While plans are in place to adopt low or zero emissions vessels in the future, it is important to deploy measures to reduce emissions now. Such measures include the use of low-carbon and transition fuels that are available today, and deploying energy savings devices onboard vessels. MOL will bring its extensive capabilities and experience to bear as it joins GCMD and existing partners to accelerate international shipping’s decarbonisation.

Professor Lynn Loo, CEO of the Global Centre for Maritime Decarbonisation, said: “We are proud to have MOL, one of the leading shipowners in Japan, come onboard as an Impact Partner. We are excited to tap on MOL’s track record in developing technical energy efficiency measures to broaden our perspective as we scope an initiative to help increase industry adoption of measures that can increase fuel efficiency of ships.”

Toshiaki Tanaka, Representative Director, Executive Vice President Executive Officer, and Chief Operating Officer of MOL, said: “We are very pleased to be a partner of one of the most important global coalitions. We will make our biggest effort to contribute and accelerate progress towards the net zero future in maritime industry, together with GCMD and all its partners.”

About the Global Centre for Maritime Decarbonisation

The Global Centre for Maritime Decarbonisation (GCMD) was set up on 1 August 2021 as a non-profit organisation. Our strategic partners include the Maritime and Port Authority of Singapore (MPA), BHP, BW Group, Eastern Pacific Shipping, Foundation Det Norske Veritas, Ocean Network Express, Seatrium, bp, Hapag-Lloyd and NYK. Beyond the strategic partners, GCMD has brought on board 15 partners that engage at the centre level, in addition to more than 80 partners that engage at the project level.

Strategically located in Singapore, the world’s largest bunkering hub and second largest container port, GCMD aims to help the industry eliminate GHG emissions by shaping standards for future fuels, piloting low-carbon solutions in an end-to-end manner under real-world operations conditions, financing first-of-a-kind projects, and fostering collaboration across sectors.

Continue Reading

Container Shipping Lines

Wan Hai Lines establishes its new office in India

Published

on

Wan Hai Lines establishes its new office in India. Image: Unsplash
Wan Hai Lines establishes its new office in India. Image: Unsplash
Listen to the story (FreightComms AudioPost)

 

Aiming to further enhance service quality and gain a stronger foothold in the Indian sub-continent, Wan Hai Lines has established its India new office in Kolkata in July 2023. Contact details for the new office are as follows: WAN HAI LINES (INDIA) PVT. LTD 3rd Floor, Block C, Apeejay House, 15 Park Street, Kolkata, West Bengal, 700016 TEL: 91-33-4450 4500 According to the 2023 Foreign Trade Policy announced by the Indian Ministry of Commerce and Industry, India’s export trade volume will reach 2 trillion US dollars in 2030.

Therefore, benefiting from government policy incentives and the shifting trend of the global supply chain, India’s status in global manufacturing and international trade is increasing, which is conducive to maintaining long-term high economic growth. And the proportion of global exports has increased significantly. In addition, the continuous economic stimulus policy will help revitalize the domestic economy, and domestic demand is expected to increase significantly. Therefore, Wan Hai is optimistic about India’s future import and export situation. And also through the establishment of a new office to improve the overall operating efficiency.

Wan Hai India Kolkata office held a grand opening reception in the evening of 27th July. During the banquet, there were many important customers & guests. The Kolkata Port Authority, Kolkata terminal operators, feeder operators and important local customers were invited to send representatives to attend the meeting to express their blessings to Wan Hai’s opening of the Kolkata market. At present, Wan Hai has six owned offices in India, namely Mumbai, Chennai, Mundra, and Vizag, Delhi and the sixth office Kolkata office. In addition to directly providing river port services, it will also simultaneously strengthen service links between India and neighboring countries, such as Nepal and Bhutan. It is expected to pursue customer first through continuous expansion in the future and sustainable business philosophy.

Continue Reading

Popular

Copyright © 2017-18 | FreightComms | Made with ♥ in Singapore